¿El daño por electricidad estática sigue siendo un gran problema con la electrónica?

Tabla de contenido:

Video: ¿El daño por electricidad estática sigue siendo un gran problema con la electrónica?

Video: ¿El daño por electricidad estática sigue siendo un gran problema con la electrónica?
Video: Por qué deberías COMPRAR un iPhone y NO un Android (2022) 2024, Marcha
¿El daño por electricidad estática sigue siendo un gran problema con la electrónica?
¿El daño por electricidad estática sigue siendo un gran problema con la electrónica?
Anonim
Todos hemos escuchado las advertencias para asegurarnos de que estamos conectados a tierra correctamente cuando trabajamos en nuestros dispositivos electrónicos, pero ¿los avances en la tecnología han reducido el problema del daño por electricidad estática o sigue siendo tan frecuente como antes? La publicación de preguntas y respuestas de SuperUser de hoy tiene una respuesta completa a la pregunta de un lector curioso.
Todos hemos escuchado las advertencias para asegurarnos de que estamos conectados a tierra correctamente cuando trabajamos en nuestros dispositivos electrónicos, pero ¿los avances en la tecnología han reducido el problema del daño por electricidad estática o sigue siendo tan frecuente como antes? La publicación de preguntas y respuestas de SuperUser de hoy tiene una respuesta completa a la pregunta de un lector curioso.

La sesión de Preguntas y Respuestas de hoy nos llega por cortesía de SuperUser, una subdivisión de Stack Exchange, un grupo de sitios web de preguntas y respuestas impulsado por la comunidad.

Foto cortesía de Jared Tarbell (Flickr).

La pregunta

El lector superusuario Ricku quiere saber si el daño por electricidad estática sigue siendo un gran problema con la electrónica ahora:

I have heard that static electricity was a big problem a couple of decades ago. Is it still a big problem now? I believe that it is rare for a person to “fry” a computer component now.

¿El daño por electricidad estática sigue siendo un gran problema con la electrónica ahora?

La respuesta

Argonauts, el contribuyente del superusuario, tiene la respuesta para nosotros:

In the industry, it is referred to as Electro-Static Discharge (ESD) and is far more of a problem now than it has ever been; although it has been mitigated somewhat by the fairly recent widespread adoption of policies and procedures that help to lower the likelihood of ESD damage to products. Regardless, its impact on the electronics industry is larger than many other entire industries.

It is also a huge topic of study and very complex, so I will just touch on a few points. If you are interested, there are numerous free sources, materials, and websites dedicated to the subject. Many people dedicate their careers to this area. Products damaged by ESD have a very real and very large impact on all the companies involved in electronics, whether it is as a manufacturer, designer, or “consumer”, and like many things dealt with in an industry, its costs are passed along to us.

From the ESD Association:

As devices and the size of their features continuously become smaller, they become more susceptible to being damaged by ESD, which makes sense after a bit of thought. The mechanical strength of the materials used to build electronics generally goes down as their size decreases, as does the material’s ability to resist rapid temperature changes, usually referred to as thermal mass (just like in macro scale objects). Around 2003, the smallest feature sizes were in the 180 nm range and now we are rapidly approaching 10 nm.
As devices and the size of their features continuously become smaller, they become more susceptible to being damaged by ESD, which makes sense after a bit of thought. The mechanical strength of the materials used to build electronics generally goes down as their size decreases, as does the material’s ability to resist rapid temperature changes, usually referred to as thermal mass (just like in macro scale objects). Around 2003, the smallest feature sizes were in the 180 nm range and now we are rapidly approaching 10 nm.

An ESD event that 20 years ago would have been harmless could potentially destroy modern electronics. On transistors, the gate material is often the victim, but other current carrying elements can be be vaporized or melted as well. Solder on an IC’s pins (a surface mount equivalent like a Ball Grid Array are far more common these days) on a PCB can be melted, and the silicon itself has some critical characteristics (especially its dielectric value) that can be changed by high heat. Taken altogether, it can change the circuit from a semi-conductor to an always-conductor, which usually ends with a spark and a bad smell when the chip is powered on.

Smaller feature sizes are almost entirely positive from most metrics perspectives; things like operating/clock speeds that can be supported, power consumption, tightly coupled heat generation, etc., but the sensitivity to damage from what would otherwise be considered trivial amounts of energy also greatly increases as the feature size goes down.

ESD protection is built into many electronics today, but if you have 500 billion transistors in an integrated circuit, it is not a tractable problem to determine what path a static discharge will take with 100 percent certainty.

The human body is sometimes modeled (Human Body Model; HBM) as having 100 to 250 picofarads of capacitance. In that model, the voltage can get as high (depending on the source) as 25 kV (though some claim only as high as 3 kV). Using the larger numbers, the person would have an energy “charge” of approximately 150 millijoules. A fully “charged” person would not typically be aware of it and it gets discharged in a fraction of a second through the first available ground path, frequently an electronic device.

Note that these numbers assume the person is not wearing clothing capable of carrying an additional charge, which is normally the case. There are different models for calculating ESD risk and energy levels, and it gets fairly confusing very quickly since they appear to contradict each other in some cases. Here is a link to an excellent discussion of many of the standards and models.

Regardless of the specific method used to calculate it, it is not, and certainly does not sound like much energy, but it is more than sufficient to destroy a modern transistor. For context, one joule of energy is equivalent (according to Wikipedia) to the energy required to lift a medium-size tomato (100 grams) one meter vertically from the surface of the Earth.

This falls on the “worst scenario” side of a human-only ESD event, where the human is carrying a charge and discharges it into a susceptible device. A voltage that high from a relatively low amount of charge occurs when the person is very poorly grounded. A key factor in what and how much gets damaged is not actually the charge or the voltage, but the current, which in this context can be thought of as how low the resistance of the electronic device’s path to a ground is.

People working around electronics are usually grounded with wrist straps and/or grounding straps on their feet. They are not “shorts” for grounding; the resistance is sized to prevent the workers from serving as lightning rods (easily getting electrocuted). Wrist bands are typically in the 1M Ohm range, but that still allows for the quick discharging of any accumulated energy. Capacitive and insulated items along with any other charge generating or storing materials are isolated from work areas, things like polystyrene, bubble wrap, and plastic cups.

There are literally countless other materials and situations that can result in ESD damage (from both positive and negative relative charge differences) to a device where the human body itself does not carry the charge “internally”, but just facilitates its movement. A cartoon level example would be wearing a wool sweater and socks while walking across a carpet, then picking up or touching a metal object. That creates a significantly higher amount of energy than the body itself could store.

One last point on how little energy it takes to damage modern electronics. A 10 nm transistor (not common yet, but it will be in the next couple of years) has a gate thickness less than 6 nm, which is getting close to what they call a monolayer (a single layer of atoms).

It is a very complicated subject, and the amount of damage an ESD event can cause to a device is difficult to predict due to the huge number of variables, including the speed of discharge (how much resistance there is between the charge and a ground), the number of paths to a ground through the device, humidity and ambient temperatures, and many more. All of these variables can be plugged into various equations that can model the impact, but they are not terribly accurate at predicting actual damage yet, but better at framing the possible damage from an event.

In many cases, and this is very industry specific (think medical or aerospace), an ESD-induced catastrophic failure event is a far better outcome than an ESD event that passes through manufacturing and testing unnoticed. Unnoticed ESD events can create a very minor defect, or perhaps slightly worsen a pre-existing and undetected latent defect, which in both scenarios can get worse over time due to either additional minor ESD events or just regular usage.

They ultimately result in a catastrophic and premature failure of the device in an artificially shortened time frame that cannot be predicted by reliability models (which are the basis for maintenance and replacement schedules). Because of this danger, and it is easy to think of terrible situations (a pacemaker’s microprocessor or flight control instruments, for example), coming up with ways to test for and model latent ESD-induced defects is a major area of research right now.

For a consumer who does not work in or know much about electronics manufacturing, it may not seem to be an issue. By the time most electronics are packaged for sale, there are numerous safeguards in place that would prevent most ESD damage. The sensitive components are physically inaccessible and more convenient paths to a ground are available (i. e. a computer chassis is tied to a ground, discharging ESD into it will almost certainly not damage the CPU inside the case, but instead take the lowest resistance path to a ground via the power supply and wall outlet power source). Alternatively, no reasonable current carrying paths are possible; many mobile phones have non-conductive exteriors and only have a ground path when being charged.

For the record, I have to go through ESD training every three months, so I could just keep going. But I think this should be sufficient to answer your question. I believe everything in this answer to be accurate, but I would strongly advise reading up on it directly to get better acquainted with the phenomenon if I have not destroyed your curiosity for good.

One thing that people find counter-intuitive is that the bags you frequently see electronics stored and shipped in (anti-static bags) are also conductive. Anti-static means that the material will not collect any meaningful charge from interacting with other materials. But in the ESD world, it is equally important (to the best extent possible) that everything has the same ground voltage reference.

Work surfaces (ESD mats), ESD bags, and other materials are all typically kept tied to a common ground, either by simply not having an insulated material between them, or more explicitly by wiring low resistance paths to a ground between all work benches; the connectors for the workers’ wrist bands, the floor, and some equipment. There are safety issues here. If you work around high explosives and electronics, your wrist band might be tied directly to a ground rather than a 1M Ohm resistor. If you work around very high voltage, you would not ground yourself at all.

Here is a quote on the costs of ESD from Cisco, which might even be a bit conservative, as the collateral damage from field failures for Cisco typically do not result in the loss of life, which can raise that 100x referred to by orders of magnitude:

Image
Image

¿Tienes algo que añadir a la explicación? Apaga el sonido en los comentarios. ¿Quieres leer más respuestas de otros usuarios de Stack Exchange con experiencia en tecnología? Echa un vistazo a la discusión completa aquí.

Recomendado: